Many men thought about an increase in the penis, but the methods with which they are familiar are somewhat scared.In medicine there is such a tool as a vacuum pump.
It is used for operations in male genitals to maintain the size of the penis.
How the pump works
The operation principle is quite simple.With the help of a vacuum around the penis, weak pressure occurs, which causes stimulation of the bloodstream.For this reason, the cave -like fabrics are filled with blood, causing a quick increase and hardening of the penis.A similar phenomenon in medicine is called hyperemia.
During an erection, the fabric of the penis is poured with blood, it swells sharply from it.The vacuum pump stimulates the vessels and allows you to maintain a member size of 30 to 60 minutes.This device can also be used instead of a massage.
The pressure in the piston extends the cave -like body and significantly increases blood flow and the size of the penis.The member after the pump looks much more spectacular than with ordinary excitement.
Do not abuse vacuum pump during use.The genitals will not become more of it than it should, but bleeding, bruising and other complications can occur!
Varieties
All vacuum pumps have a similar design and do not take their action principle into account.The ship in which the male organ is located is a plastic piston with departments.Together with her there is a nozzle of the seal and a pear that pumps the pressure in the piston.
There are devices with additional devices: pressure setting buttons, manometers, valves for reset.
In manual air, a pear or piston is removed and removed.Your application is good in that you are available to every man who wants to increase your genitals.
In the automatic vacuum, it is created with an electric pump that works on batteries.The pressure can be monitored on a mounted manometer and some samples are equipped with a button for the absorption power.
Water devices are a more modern option for increasing the male penis.Their action principle is based on the fact that the piston is pumped with a pump instead of air with water.The hydraulic foam has greater efficiency and life is longer.
How do I choose a pump?
The device is selected according to two criteria: in terms of genitals and a certain task.
- The length of the vessel should be at least 2-3 cm larger than the penis in a lively state.
- The diameter of the piston must be selected 1-2 cm larger than the diameter of the male member during an erection.
- For those who do this for the first time, experts with manual pomp recommend that air pumps are carried out with a pear.
It is better to buy an apparatus with a transparent piston to monitor the process and also pay attention to the strength of the material from which it is manufactured.
pros and cons
A vacuum pump for men can not only increase the size of the penis, but also have a therapeutic effect.If you use it all the time, the volume of male genitals increases over time, and the erection stays much longer during sexual intercourse.This is due to a decrease in the sensitivity of the organ.
In addition, the male dignity increases not only in length, but also in width.
Under the influence of a vacuum, you can also adapt the shape of a male organ, especially if it has a curvature.In the pump, the penis is kept evenly by the edges of the walls, in this way it is straightened.
The consequences of improper use:
- Due to the violation of the capillaries, special spots are created on the skin of the penis;
- Reduction of ejaculation or erection;
- Deafness.
Efficiency in use
With constant use, the shape and size of the penis remains unchanged after six months.The result will be much more effective if you take medication that increases the release of male hormones during this time.
The member after the pump became up to 3 cm longer for a period of 6 months.The thickness of the dignity rose to 2 cm.
Instructions for use
When the vacuum pump is used for the first time, the process should not take longer than 5 minutes to avoid unpleasant consequences.Incorrect use can lead to diseases of some functions and edema.
To prevent this, the following recommendations must be followed
- First of all, air must be pumped out of the device, which improves blood flow to blood flow in the penis.Before that, it is necessary to take care of the lubrication of the penis.
- A penis increase should not take longer than 20 minutes.
- To reduce the pressure in the ship, you have to start the air.To do this, simply press on a special valve that is placed near a pear.In some models there is a small hole for these purposes that is covered with a finger during the procedure.
- After the member has reached maximum hardness, you have to put on a ring on its base, which persecutes an overgrown with an organ and keeps it in an erection state.
- If a pump with a hydraulic pump, a relaxing bathroom with hot water must be absorbed before the procedure.After that, after 8 minutes male dignity must be placed in a vacuum vessel.The ring should fit tightly into the scrotum, which reduces the pressure in this area.The device is placed so that the distance from the penis to the walls of the piston is the same from all sides.It is important to do this before the moment of suction begins.If you observe these instructions, injuries can be avoided.
- In order to form a vacuum environment, experts recommend performing several swinging movements.Then the excess water is lowered with a trigger.Sometimes the pump has to be pressed several times so that the entire excess fluid leaves.
- After the water waste, you can rest a little and then continue to the procedure.If the pressure falls, it must be pumped on the required level.
The male advantage can be increased using a number of special exercises.However, all recommendations for the use of the device must be observed.
During the first week, the procedure will be carried out once a day.
In the second week, 15, for the third 10 minutes twice a day.
The fourth - twice a day for 15, the fifth - 20 minutes in the morning and 10 a.m.
Possible consequences
In the case of improper use of the device, injuries often occur.
- Due to the stagnation of the lymph, a swollen ring around the head of the penis appears.Sometimes this problem can occur even with proper use.In such cases, it is better to stop the procedure for a while.
- As a result of longer manipulation or low pressure in the vessel, a large lymphatic current occurs, which forms a swelling.
- The deterioration of an erection is the most common consequence.
- A change in the skin color can occur in the event of a heavy load.Due to severe discharge, bleeding often occurs, which can be irreversible.
- Bloches of blood vessels is the rarest problem, but dangerous.It is therefore better to move the company to increase the penis.
Contraindications
The duration of the vacuum environment is determined by cell expansion.Subject to all recommendations for the use of the device, an impulse effect is created in the ship.With its increase, there is a negative pressure caused by deafness, and a person does not feel pain.
The maximum vacuum volume should not cause pain, but a single effect of no more than 18 seconds.The duration of the vacuumanipulations per day should not exceed 45 minutes.
The male penis of the member has the following contraindications:
- Diabetes mellitus;
- sexually transmitted diseases;
- Inflammation of the urethra;
- Determination of the functions of the digestive system's excretion organs;
- Cardiovascular pathologies;
- The risk of blood clots.
Operation of the device
In order for the device to maintain its suitability as long as possible, special care is required.In view of the fact that manipulations are carried out in an intimate place that is necessary to comply with careful observance of personal hygiene rules, the pump must be treated with antibacterial solutions.
Before use, it is recommended to wash the vacuum pump with warm water and soap and to treat all components with antiseptics.After the procedure, this invention is sterilized, wiped off and stored in a clean, dry place.
How do I do it myself?
The device can not only be useful to increase the size of a person's genital organ or healing therapy.
The pump can be made from improvised agents that are stored in the garage or the pantry.
From the cuff pump
Before you start manufacturing, it is necessary to prepare all spare parts and tools that can be useful for use.A vacuum pump is usually made from a car or a bicycle cuff.This is the simplest and most reliable method.
First of all, you have to create the opposite effect of the pump so that it does not give air, but on the contrary.In order to carry out such an effect, it is necessary to relax the pump, turn the cuff with the back and then put together the device.This creates a vacuum environment.
Then mount the check valve for the descent of excess air.The valve of the aquarium compressor is suitable for this.It is mounted in the pump hose to prevent air from entering the pump.For a greater effect, it is recommended to make its seal.
This method is the simplest and is supposed to create a flat vacuum environment.The power is up to 80% air pumps.If you have to create a more powerful pump, you can use a household compressor.
Using a medical syringe
We make a vacuum pump of a regular medical syringe.The following materials are required for this:
- Plastic -T -shirt;
- a plastic tube that should coincide with the diameter of the holes of the discount and syringe;
- two valves from the aquarium compressor;
- The syringe (the performance of the future device depends on its size).
From the plastic tube it is necessary to cut three parts 10 cm and then attach it to the T shirt.The joints should be hermetic and well fixed so that they do not get out when pressure occurs.The T shirt with three bouncers should be preserved.
One of them that is in the middle is attached to the nose of the syringe.At the remaining two ends it is necessary to install the valves and one should open inwards.In order not to confuse, the arrows are usually placed on aquarium valves that display the direction of the air movement.
Such a device from a syringe can pump liquid from one container to another.
In order to carry out the procedure, a withdrawal with a valve is lowered into the liquid, and the second in an empty container that needs to be filled.The pump is driven with a piston.